Easy methods to troubleshoot your damaged PSU – Customized Gaming & Fanatic PC Weblog

In case your PC received’t boot, there’s likelihood that the facility provide could be the supply of the difficulty. In earlier movies, we’ve outlined just a few indicators that your energy provide could also be failing, however on this one, we’ll go over some primary troubleshooting to isolate and hopefully resolve the issue.

First, we’ll want to substantiate that this isn’t an area electrical subject.

  1. Check whether or not the issue is said to your wall socket or a blown fuse purchase plugging the PC right into a identified working outlet
  2. Verify that the facility cable shouldn’t be the difficulty by swapping for a identified working cable
  3. Verify all energy cable connections for tightness
  4. Verify the facility swap on the rear of the PSU to substantiate it’s within the | place
  5. Verify the PSU for exterior put on or harm doubtlessly attributable to overheating

Should you’ve accomplished these steps and your PC will nonetheless not boot, you may carry out what’s referred to as a Jumper Check to judge the performance of the PSU itself.

  1. Fully disconnect your energy provide from the motherboard and your energy cable. For modular energy provides depart the 20-pin connector connected. You’ll want it in a sec.
  2. Bend a steel paperclip right into a U-Form
  3. With the Energy Provide swap within the O place and unplugged, insert one finish of the paperclip into the inexperienced pin and the opposite right into a black pin.
  4. Plug within the PSU and flip the facility swap. In case your PSU fan spins, which means it’s getting energy and has not failed fully. This might nonetheless imply a partial failure is inflicting your points, but it surely may additionally imply the issue is elsewhere. If the fan doesn’t spin, it’s time to exchange that energy provide.

That’s it! Try the Velocity Micro blog for extra PC troubleshooting ideas and tips to assist get you again up and working.

The next two tabs change content material beneath.

Charlie has been a member of Velocity Micro’s workforce since 2018. He has a love for each graphic design and PC gaming.